Rental Trailer 21611 – Dual Phase Extraction System
DPE Vacuum Pump
Includes: Rotary Claw Blower Package with 15 HP 208-230/3P TEFC motor:
- Maximum performance at inlet of blower: 320 ACFM @ 20” Hg
- 3” inlet/outlet
- Inlet vacuum relief valve (factory set)
Inlet piping to blower to contain:
- 3” Inline Filter MAE2 300T with 234P Filter element
- Vacuum Gauge 0-30” Hg stainless steel liquid filled brass internals
- ¼” Brass Sample Port
- 2” Dilution Filter Solberg FS31P-200 with 2” adjustable brass gate valve
- 3” schedule 80 PVC piping
Discharge piping from blower to contain:
- Pressure Gauge 0-100” wc
- ¼” brass Sample port
- 3” aluminized stack through roof with rain flapper cap
Moisture Separator
Includes: 120 G vapor liquid separator with:
- Aluminum construction
- 8” Clean out with steel pipe plug cover plate
- 3” Inlet/3” outlet
- Vacuum Gauge 0-30” hg Stainless Steel liquid filled with brass internals
- Tank manual drain valve 1/2” brass ball valve
- 2” clear PVC sight tube with 1” Schd 80 PVC TUB ball valve connections
- Stainless steel stem mounted level assembly with union end connection
- LSHH High level alarm switch
- LSH High level pump control switch
- LSL Low level pump control switch
Manifold
Includes: 3” aluminum header with 11 2” legs each with:
- 2” brass gate
- Vacuum Gauge
- ¼” brass sample port
Moisture Separator Effluent Pump
Liquid discharge piping from vapor liquid separator to contain:
- 1” Brass pump inlet ball valve
- 1” brass wye strainer
- Progressive Cavity transfer pump with 1.5 HP 208-230/3P TEFC motor:
- Performance: 10 GPM at 15” Hg
- Discharge Pressure gauge Liquid Filled Stainless 0-100 psi
- ¼” Brass Sample port
- 1” brass discharge gate valve
- 1” brass discharge swing check valves
- 1” Schd 80 PVC piping
- 1” recirculation line with gate valve
- Pump to be closed coupled and mounted on elevated base
Oil Water Separator
Includes: One (1) OWS-10 with:
- Marine Grade Aluminum construction
- Meets or exceeds API 421
- Designed for oils with a specific gravity of less than 0.85
- 25 micron removal size
- Removable, gasket sealed lid
- Adjustable rotary product skimmer with 2” Brass ball valve
- Easily removable PVC coalescing media
- Separation chamber Ventilation stack to exterior of system
- Effluent Pump out Sump
- ½” tank drain valves
Product Drum:
- 55 Gallon Closed Top Steel Drum (shipped Loose)
- Single Point Stainless Steel Float switch with High Level alarm
- Float stem wiring to junction box mounted to exterior of system by others
Oil Water Separator Effluent Pump
Liquid discharge piping from vapor liquid separator to contain:
- 1” Brass pump inlet ball valve
- 1” brass wye strainer
- SS centrifugal transfer pump with 3/4 HP 208-230/3P TEFC motor:
- Performance: 10 GPM at 50 TDH
- Discharge Pressure gauge Liquid Filled Stainless 0-100 psi
- ¼” Brass Sample port
- 1” brass discharge gate valve
- 1” brass discharge swing check valves
- 1” Schd 80 PVC piping
- Pump to be closed coupled and mounted on elevated base
Air Stripper
Includes: QED EZ Stacker 2.4 air stripper with 3HP Blower 208-230/3P TEFC motor
- Max water flow rate: 25 GPM
- Air flow rate: 140 SCFM @ 24” wc pressure
- 1/2” drain with brass ball valve
Air supply piping to stripper to contain:
- Sump Differential Pressure gauges (2) 0-100” wc
- Pressure Switch 0-40” wc with Low adjustable alarm settings
- Blow Discharge Butterfly Valve 4” Lug Style with Flanged ends
- 4” Inlet plumbed to exterior of system enclosure
- PVC piping
Air discharge piping from air stripper to contain:
- 4” PVC piping exit through wall with PVC Tee rain cap 3’ above roof-line
Air Stripper Effluent Pump
Liquid discharge piping from vapor liquid separator to contain:
- 1” Brass pump inlet ball valve
- 1” brass wye strainer
- SS centrifugal transfer pump with 1 HP 208-230/3P TEFC motor:
- Performance: 10 GPM at 60 TDH
- Discharge Pressure gauge Liquid Filled Stainless 0-100 psi
- ¼” Brass Sample port
- 1” brass discharge gate valve
- 1” brass discharge swing check valves
- 1” Schd 80 PVC piping
- Pump to be closed coupled and mounted on elevated base
Bag Filtration
Two (2) BNF-1 # 1 size carbon steel filter housings with:
- Plumbed in Parallel with (4) 1” Brass inlet/outlet isolation ball valve
- 12 size filter vessels
- Inlet/Outlet liquid filled stainless steel 0-100 PSI pressure gauge
- 1” side inlet/side outlet schedule 80 pvc piping
- Swing Bolt Cover
- Stainless Steel Strainer Basket
- Adjustable Tripod Leg Stand
- ¼” Bleeder valve
- 1/2” Bronze manual drain valve
Liquid Phase Carbon:
Includes: Two (2) MAE2 LDS-100 100 lb. fiberglass Liquid GAC Vessels each with:
- 100 lb. fill of Carbon
- Inlet liquid filled stainless steel 0-100 PSI pressure gauge
- Outlet ¼” brass sample ports
- 3 7’ section of 1” Tiger Flex Chemical hose with Fem Cam Ends
- 1” Schd 80 PVC discharge piping to contain Watts Anti Siphon valve
- Discharge Water meter Dwyer WMT 1” cold water meter
Control System
Includes: PLC Based control panel with the following standard features:
- 230 V 3 phase 4 wire
- UL certification 698A labeled
- NEMA 4 door in door panel enclosure
- Primary circuit protection using through door main disconnect
- Branch Circuit protection for motor & house loads
- Automation Direct Click PLC fully programmed and developed
- (5) Motor starters
- 15 AMP GFI
- Illuminated HOA switches
- Estop Button mounted to exterior of enclosure
- Intrinsically Safe Relays
- Alarms with interlocks for proper system operations
- Automatic restart on power failure
- Phase/Voltage monitor with adjustable trip and restart delays
- Surge and lightning protection via Main Line TVSS
- 9” Color OIT with developed graphics P&ID display
- Hour meters on OIT
- Sixnet 4G wireless modem w/ remote access to system ($125 per month)
- Wired and installed
- Factory tested prior to shipping
Remediation Enclosure
Enclosure Built to NEC Class 1 Div. 2 standards for DPE room. All wiring Class I Div. 2 wiring will be intrinsically safe.
All equipment will be pre-piped, pre-wired, mounted and factory tested in enclosure
Includes: 8’ x 18 x 7.6’ enclosed cargo trailer with the following standard features:
- (2) spring axles
- 4 D rings welded to trailer corners for tie down purposes
- 3/8” interior plywood walls and ceilings
- 1” insulation in walls and ceilings
- ¾” pressure treated plywood floor with anti skid paint
- Steel tube frame 16” on center walls and 24” on center ceilings
- Double rear locking doors
- 36” man locking man door
- .24 white exterior aluminum siding
- Galvalume steel roof with high tech sealant
- Electric Breaks with breakaway switch, 2 5/16 coupler with safety chains
- DOT triple rear sealed lights, signal lights and reflectors
- Front stone guard, aluminum exterior trim and fenders
Interior to contain
- DPE Blower, Knockout, OWS, Air stripper, Carbon, Pumps & DPE Piping
- Control panel to be mounted on front wall of trailer
- 16” EXP ventilation fan with 16” intake louver with remote T stat
- 36 Kw EXP heater with remote T stat
- Fan and Intake Rain hoods
- (2) wall mount 20” air intake louvers with Rain hoods
- E stop Box near door Circuit to be Intrinsically Safe (Class I Div. 2)
- Pipe penetration sealed with high temp caulk
- All influent, effluent lines plumbed through trailer floor