MID-ATLANTIC ENVIRONMENTAL EQUIPMENT

Rental Trailer 13410 – DPE System

Drawings

SVE Influent Manifold

Includes: 4” Header and Nine (9) 2” individual legs each leg to contain:

  • 2” ball valve
  • 0-30” Hg vacuum gauge
  • 2” PVC SCH80 plumbing for influent manifold

Rotary Claw MPE Vacuum Pump

Includes: Two (2) Rotary claw vacuum pumps with 7.5 HP 230/460V/3P motor:

  • Motor: TEFC (suitable for Class 1 DIV 2)
  • Maximum performance at inlet of each blower:
  • 338 ACFM @ 20” Hg (116 SCFM)
  • Expected inlet pressure losses through MAE2 system: 15” WC
  • Noise rating: 82 dBA

Inlet piping to blowers to contain:

  • Vacuum gauges
  • 2” Inlet gate valves
  • 2” Discharge check valves
  • One (1) 4” Solberg inlet filter/silencer
  • One (1) 2” Dilution valve with Solberg filter/silencer
  • One (1) Auto Oiler
  • PVC piping

Common Discharge piping from blowers to contain:

  • Sample port with gate valve
  • Pressure gauge
  • Temperature gauge
  • Steel piping

Moisture Separator

Includes: 120 G vapor liquid separator with:

  • Aluminum Construction
  • 4” inlet
  • 6” clean out
  • 2” clear PVC sight tube
  • Stainless steel stem mounted level assembly
  • High level alarm switch
  • High level pump control switch
  • Low level pump control switch
  • Manual drain plumbed to exterior of enclosure

Moisture Separator Effluent Pump

Liquid discharge piping from moisture separator to contain:

  • Ball valve
  • 2 HP 230 V 3 phase TEFC Progressive cavity transfer pump:
    • Performance: 25 GPM at 15” Hg
  • Pressure gauge
  • Sample port
  • Gate valve
  • Check valve
  • Re-circulation line
  • PVC piping

OIL WATER SEPARATOR/AS COMBO UNIT

MAE2 10 GPM oil water separator with:

  • Designed for oils with a specific gravity of less than 0.75
  • 25 micron removal size
  • Gasket sealed lid
  • Adjustable rotary skimmer
  • Easily removable coalescing media
  • Ventilation stack

MAE2 Diffuser Stripper Box with:

  • 2” Gravity inlet
  • 2 2” PVC Diffuser Tubes
  • Effluent Pump out tank
    • Effluent chamber high level alarm switch
    • Effluent chamber high level switch
    • Effluent chamber low level switch
  • Manual drains

Centrifugal transfer pump:

  • Motor: 1 HP 230 V 3 phaseTEFC (Suitable for CL 1 DIV 2)
  • 25 GPM @ 50 TDH

Water inlet piping to contain the following components:

  • Ball valve
  • Wye Strainer

Water discharge piping to contain the following components:

  • Pressure gauge
  • Sample port
  • Gate valve
  • Check valve
  • PVC piping

Diffuser Blower

Includes: Air supply piping to stripper to contain:

  • 3 HP 230 V 3 phase pressure blower 210 cfm @ 14” wc
  • Inlet filter screen
  • Pressure gauge
  • Butterfly valve
  • Pressure gauge
  • Low pressure alarm switch
  • PVC piping

Air discharge piping from air stripper to contain:

  • Sample port
  • PVC piping to be piped through roof of enclosure

Air Stripper Effluent Transfer Pump

Water discharge piping from air stripper to contain:

  • Ball valve
  • 2 HP 230 V 3 phase Centrifugal transfer pump with:
  • Performance: 25 GPM at 90 TDH
  • Pressure gauge
  • Sample port
  • Gate valve
  • Check valve
  • PVC piping

Bag Filtration

Includes:Two # 2 size bag filter housings with:

  • Carbon steel construction
  • 2” side inlet/bottom outlet
  • Tripod stand
  • Pressure gauges
  • Ball valves
  • Sample ports
  • Set of 2” chemical hose with cam lock ends

Carbon Filtration

Includes: Two 200 lb liquid phase carbon vessels with:

  • FRP construction
  • 1” side inlet/bottom outlet
  • Interconnecting hose with cam/groove fittings
  • Pressure gauges
  • Ball valves

Control System

Includes: PLC based control panel with the following standard features:

  • NEMA panel enclosure
  • Externally mounted Emergency Stop/Disconnect Switch
  • Inner swing panel
  • Primary circuit protection using internal fused main disconnect
  • Main power block
  • Branch circuit protection with circuit breakers for motors
  • Motor starters with overload protection
  • Branch circuit protection with circuit breakers for powered devices
  • PLC control system
  • Wireless modem telemetry (requires $125 per month service fee)
  • 9” Color Operator interface with graphics
  • 24 VDC IS power supply
  • Intrinsically safe relays
  • Wired and installed
  • Factory tested prior to shipping

Outside cover of inner swing panel to contain the following:

  • HOA switches with green run lights
  • Red alarm indicator lights

Remediation Enclosure

Built to NEC Class 1 Div 2 standards, all wiring intrinsically safe and all equipment pre-piped factory tested and mounted in enclosure

Includes: 8’ x 24 enclosed cargo trailer with the following standard features:

  • 7.5’ standard interior height
  • Tandem axles
  • Aluminum siding (white)
  • Independent suspension
  • Electric brakes
  • Break away kit
  • Safety chain
  • Insulated walls and ceiling
  • Barn-style rear double doors
  • One man door
  • Control panel mounted to exterior

Interior to be rated hazardous and to contain the following:

  • Vacuum extraction system
  • Groundwater treatment system
  • EXP Lighting
  • EXP Ventilation fan with thermostat and sound hood
  • Passive vent louvers with sound attenuating hood
  • EXP Heater with thermostat controls
  • Emergency stop switch
  • All influent, effluent, and drain lines plumbed to outside of building

Posted in Uncategorized